Table of Contents
Advertisement
Chapter 7. Upgrading Print Server
7.1 Overview
Upgrading print server will allow you to upgrade its firmware inside the print server while the newer
software version of the print server is available from your local dealer. Depending on the different systems
users might use, this chapter is divided into several Sections; please refer to the following lists for your
systems.
1. Upgrading the print server from PSAdmin
2. Upgrading the print server from command prompt
3. Upgrading the print server from WEB browser
Note:
1)
Before you proceed to upgrade the print server, please ensure that the necessary binary file is located
on your current working directory.
2)
Before upgrading the print server, ensure that it is not printing jobs. You have to wait until the print job
is finished before you can proceed.
3)
Be careful not to interrupt the file transfer. If the transfer is interrupted, the print server may have to be
re-initialized by your dealer.
7.2 Upgrading the print server from PSAdmin
1)
Ensure binary file is located in the PSAdmin directory.
2)
Run PSAdmin from your Windows-based computer.
3)
Click the Upgrade icon on tool bar.
7.3 Upgrading the print server from command prompt
1)
Ensure binary file is located in your current working directory.
2)
At command prompt, and type "tftp –i <print server's IP address> put mpsXX.bin ".
3)
Wait for the transfer successful message.
4)
Done.
7.4 Upgrading the print server from Browser
1)
Ensure binary file is located in your local drive.
2)
Enter the IP address of the print server as the URL. Default is 192.168.0.10
3)
Click Misc, and then choose Firmware Upgrade.
4)
Click Browse... and select the firmware file.
5)
Click Firmware Upgrade button.
6)
Done.
41
Hide quick links:
Advertisement
Table of Contents
