Chapter 3. How to Configure the Print Server
3.1 Using PSWizard in Windows XP/ Windows Vista/ Windows 7
To connect to the print server using PSWizard, the configuration for Windows XP, Windows Vista
and Windows 7 are similar. Here take Windows XP for example.
1.
Insert the setup CD into your CD-drive. The autorun program will be started as shown in
Figure 3-1. Select the model (TL-PS110P) of your print sever.
2.
Choose Setup Wizard.
Note:
For setup wizard under Windows Vista, you have to choose the Run as administrator by
right-click the icon on desktop.
TL-PS110P
Single Parallel Port Fast Ethernet Print Server
Figure 3-1
Figure 3-2
3