Subnet Mask: This option allows you to input subnet mask from the print server. The IP address must
meet the IP addressing requirements of the network segment.
Default Router: This option allows you to input gateway from the print server. This IP address of
gateway must meet the router or gateway to go across of the network segment.
UPnP Settings: To Disable/Enable the UPnP support of this print serve
5.5 Misc
1)
Click Misc, it then appears the sub-menu.
2)
Click Factory Default, it can restore the factory default settings to print server. It will erase all
previous settings.
3)
Click Firmware Upgrade, it then as shown in the following picture.
31