Default Configuration - NETGEAR DGND3300 - RangeMax Dual Band Wireless-N DSL Gateway Wireless Router Setup Manual

Default Configuration

You can use the reset button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset. To perform a hard reset, push and hold the reset button for
three seconds. Your device will return to the factory configuration settings shown in the table
below.
Feature
Router Login
User login URL
User name (case sensitive)
Login password (case sensitive)
Internet Connection
WAN MAC address
WAN MTU size
ADSL line rate
Local Network (LAN)
Lan IP
Subnet mask
RIP direction
RIP version
RIP authentication
DHCP server
DHCP starting IP address
DHCP ending IP address
DMZ
Time zone
Time zone adjusted for daylight saving
time
SNMP
Firewall
Technical Specifications
Default Behavior
http://www.routerlogin.net or http://www.routerlogin.com
admin
password
Use default address
1458 for Annex A World except NA, 1492 for Annex A NA
and Annex B
automatically negotiated
192.168.0.1
255.255.255.0
None
Disabled
None
Enabled
192.168.0.2
192.168.0.254
Disabled
GMT for Annex A except NA and Annex B; PST for NA.
Disabled
Disabled
39