Setting Up Your Router For Internet Access - NETGEAR DGND3300 - RangeMax Dual Band Wireless-N DSL Gateway Wireless Router Setup Manual

Setting Up Your Router for Internet Access

When configuring your wireless router manually, you must log in to your modem router to set it up
initially and to make any changes to your wireless router's settings later.
The factory default state is reset when you use the Restore Factory Settings button.
See "Restoring the Default Configuration and Password" on page 36
information.
To access the router:
1. Type http://192.168.0.1 in the address field of your browser, and then click Enter.
You can also enter either of these addresses to connect to your wireless router:
http://www.routerlogin.net or http://www.routerlogin.com.
.
Figure 12
A login window similar to the one shown in
Figure 13
Installing Your Router Manually (Advanced, Mac, and Linux Users)
Figure 13 will display.
for more
19