NETGEAR DGND3300 - RangeMax Dual Band Wireless-N DSL Gateway Wireless Router Setup Manual page 29

the WPS-capable client. (For more information on setting up a mixed network, see the on-line
User Manual. A link to the User Manual is on the Resource CD.).
If you choose to use WPS, the only security methods supported are WPA-PSK and
WPA2-PSK. WEP security is not supported by WPS.
These instructions assume that you are configuring WPS on the router for the first time and
connecting a WPS-capable device.
To set up basic wireless connectivity:
1. Log in to the modem router at its default LAN address of http://192.168.0.1 with its default
user name of admin and default password of password, or using whatever LAN address and
password you have set up.
You can also enter either of these addresses to connect to your wireless router:
http://www.routerlogin.net or http://www.routerlogin.com.
On the router main menu, select Add a WPS Client (computers that will connect wirelessly to
2.
the router are clients). The Add WPS Client wizard screen displays. Click Next.
Figure 15
Select the method for adding the WPS client. A WPS client can be added using the Push
3.
Button method or the PIN method.
• Using the Push Button. This is the preferred method.
Configuring Your Wireless Network 25