Table of Contents
Advertisement
Figure 3-13 Install a tray
Step4 Place the device horizontally on the tray, push it into the rack along the tray, and fix the front mounting
brackets onto the front square-holed brackets of the rack using the screws and cage nuts, as shown in
Figure 3-14.
Figure 3-14 Install the device using front mounting brackets and a tray
Installing the Device Using Front Mounting Brackets and Slide Rails
Installing a device with front mounting brackets and slide rails
Follow these steps to install the device with front mounting brackets and slide rails:
Step1 Put on an ESD-preventive wrist strap and verify that the rack is sturdy and properly grounded.
Step2 As shown in Figure 3-7, use the screws packed with the front mounting brackets to fix the front mounting
brackets on both sides of the device.
Step3 Fix the slide rails on both sides of the rack with M5 self-tapping screws as shown in Figure 3-15 (this
figure is for reference only and may differ from the actual installation on your rack).
3-9
Advertisement
Table of Contents
