Table of Contents
Advertisement
Figure 3-20 Mount the device on the wall
Step4 Align the two installation holes at the bottom of the device with these two screws to hang the device.
When mounting the device, keep the Ethernet ports of the device facing downwards and the two sides
with ventilation holes vertical to the ground.
Magnet Mounting
The WX3010 and WX3008 can be installed using magnet mounting.
Introduction to magnetic accessories
Magnetic accessories consists of four permanent magnets and four M3*6 countersunk head screws, as
shown in Figure 3-21.
Figure 3-21 Magnets and countersunk head screws
(1) M3*6 countersunk head screw
(2) Permanent magnet
3-13
Advertisement
Table of Contents
