Mounting The Switch; Verifying The Installation - 3Com LSBM1SRP1M1 Installation Manual

Installation Manual
H3C S9500 Series Routing Switches

3.3.3 Mounting the Switch

Note:
Make sure that supports have been installed in corresponding positions and the
supports can bear the switch weight.
1) Two people are required to lift the switch. Put the switch on the supports and slide
it into the cabinet until the rack-mounting ears touch against the front square-holed
columns.
2) Fix the rack mounting ears onto the square-holed columns with screws.
Figure 3-3 Install the switch into a standard 19-inch rack

3.3.4 Verifying the Installation

After installing the switch into the rack, check the items listed in Table 3-1.
Table 3-1 Checklist for switch installation
The cable management bracket is well
fixed on the left rack-mounting ear.
The rack-mounting ears are well fixed on
the switch.
Item
3-3
Chapter 3 Switch Installation
Result
Yes No
Remarks