About This Manual - 3Com LSBM1SRP1M1 Installation Manual

About This Manual

Related Documentation
The related manuals are listed in the following table.
H3C S9500 Series Routing
Switches Operation Manual
H3C S9500 Series Routing
Switches Command Manual
Organization
H3C S9500 Series Routing Switches Installation Manual is organized as follows:
1 Product Overview
2 Installation Preparations
3 Switch Installation
4 System Commissioning
5 Switch Monitoring and Maintenance
6 Appendix A Cable Management
7 Appendix B Engineering Labels for
Cables
Manual
It provides an operation guide. It consists of access
volume, IP service volume, IP routing volume, IP
multicast volume, MPLS/VPN volume, QoS/ACL
volume, security volume, system volume, and
acronyms.
It explains all commands available in the S9500
series and provides a list of commands the S9500
series do not support. It consists of the same
modules as the operation manual.
Chapter
Description
Contents
Introduces the appearance, architecture
and system features of the S9500
series.
Lists the preparations and precautions
for the installation.
Details the installation of the chassis,
PSUs, boards and cable connection for
the S9500 series.
Concentrates on the initial power-on and
booting of the S9500 series.
Presents the hardware and software
upgrade.
Introduces how to bind cables.
Introduces the use of engineering labels.