Safety Precautions; Definition Of Symbols; Running Preparations Safety Precautions - FUTABA 2PL Instruction Manual

For your safety as well as that of others, please read this manual thoroughly prior to instal-
lation and operation of your digital proportional R/C system.
The following defines the symbols used in this manual.
Explanation of Symbols
Danger
Warning
Caution
Explanation of Graphic Symbols
Indicates an operation that prompts a warning (including Caution).
Indicates an operation that must not be performed.
Indicates an operation that always must be performed.
Running (Sailing) Preparations Safety Precautions
Warning
(When using a Ni-cad battery to power your system)
Charging
When using a Ni-cad battery to power your system, always charge and check the
battery voltage prior to operation.
Should the battery discharge below the minimum voltage level, control will be lost.
Caution
(When using a Ni-cad battery to power your system)
When the charger is not in use, disconnect it from the outlet.
This will prevent accidents, overheating and short circuits.
2

Safety Precautions

Definition of Symbols

Procedures which may lead to a dangerous condition and cause
death or serious injury to the user if not carried out properly.
Procedures which may lead to a dangerous condition or cause
death or serious injury to the user if not carried out properly, or
procedures where the probability of superficial injury or physical
damage is high.
Procedures where the possibility of serious injury to the user is
small, but there is a danger of injury, or physical damage, if not
carried out properly.