Assembly / Adjustment; Receiver And Servo Connection; Assembly Precautions - FUTABA 2PL Instruction Manual

2-channel digital proportional r/c system for cars, boats, yachts and other models

Hide thumbs Also See for 2PL:

Table of Contents

As you connect the receiver, servos and other components, do so in accordance with the

Connections when a E.S.C. MC230CR or MC330CR are used.

E.S.C.

Receiver

Gas Powered Model

Power Switch

To Receiver

Battery

Receiver

Warning

Check

Check the receiver, servos, and battery connectors, to be sure they are firmly con-

nected.

If a connector is not fully inserted, vibration may cause the connector to work loose

while the model is operating. This will result in loss of control.

Check

Operate each servo horn over its full stroke and check to see that the linkage does not

bind or is not too loose.

Excessive force applied to the servo horn by binding or poor installation may lead to

servo problems and result in loss of control.