Belkin F5D8231-4 - N1 Wireless Router User Manual page 62

Using the Web-Based Advanced User Interface
Setting Client IP Filters
The Router can be configured to restrict access to the Internet,
e-mail, or other network services at specific days and times.
Restriction can be set for a single computer, a range of computers,
or multiple computers.
To restrict Internet access to a single computer for example, enter
the IP address of the computer you wish to restrict access to in the
(1)
IP fields . Next, enter "80" in both the port fields
(3)
. Select "Block"
all of the time. Select the day to start on top
(6)
top , the day to end on the bottom
the bottom. Select "Enable"
at the IP address you specified will now be blocked from Internet
access at the times you specified. Note: Be sure you have selected the
correct time zone under "Utilities> System Settings> Time Zone".
(1)
(4)
. You can also select "Always" to block access
(9).
Click "Apply Changes". The computer
(2) (3)
(2)
(5)
, the time to start on
(7)
, and the time to stop
(5)
(4) (7)
58 58
. Select "Both"
(8)
on
(6)
(8) (9)