F5D8231-4 Operational Principle
1. FUNCTION DESCRIPTION
The Belkin F5D8231-4 Wireless-11N Router is a next generation Router with
built-in wireless access point (AP), 4-port Fast Ethernet (10/100Base-T) switch for
LAN, and 1 Fast Ethernet port for WAN connection. The Router operates on
2.4GHz frequencies, which conforms to the IEEE 802.11b/g wireless standards,
and
the
draft
draft-802.11n-compliant radio in 2x3 (TX/RX) configuration offering breakthrough
performance and enhanced coverage to it's WiFi network. The Router is to be
used with either a Broadband ADSL or Cable Modem via the WAN port to share
broadband connections with up to 4 computers via the LAN ports and 32
computers via the WLAN. Each LAN port supports 10/100 Base-T Networks with
auto sensing and switching compatibilities. The Router's Next Gen EZ install
software operates on Microsoft's Windows 2000 and XP, and on Mac OS X. The
Router can be configured through a web-browser interface. The product is
designed for the home and small office and will be available through major
retailers and online retailers.
The F5D8231-4 uses the Marvell 88F5180N CPU as the micro-controller and
it offers a memory configuration of 4M Bytes Flash and 32MBytes DDR RAM
This device derives its power from a 12V DC power adapter which needs to
be converted to 3.3V, 2.5V, 1.5V, 1.4V and 1.2V.
The functional requirements of the system are as follows:
1. CPU
2. CODE SIZE
3. SDRAM
4. Switch
5. WAN Port
6. LAN Port
7. Power Adapter
8. LEDs
9. Reset button
11. EMC
12. PCB Layout
802.11n
specification.
Marvell 88F5180n 333MHz
4Mbyte
32Mbytes
Marvell 88E6061
One RJ45 port with auto negotiation
Four RJ45 port with LED and auto negotiation
DC 12V/1.2A
Refer to Table 1
Reset to factory default by pressing 5 seconds
Class–B
4 layers
The
router
features
Atheros's