Belkin F5D8231-4 - N1 Wireless Router User Manual page 39

Alternate Setup Method
4. User Decide Login Server Manually
If your login server IP address is not available in the "Select Your
State" drop-down menu
server IP address by placing a check in the box next to "User
decide login server manually" and type in the address next to
"Login Server"
Setting your Connection Type to L2TP [European countries only]
This type of connection is most common in European countries. If your
ISP has specifically told you that you use L2TP and has supplied you
with the proper L2TP information, then use this option.
Type in the information provided by your ISP in the space provided.
When you have finished, click "Apply Changes"
changes, the Internet Status indicator will read "connection OK" if your
Router is set up properly.
1. L2TP Account
This space is provided to type in your account name that was
assigned by your ISP.
2. L2TP Password
Provided by your ISP. Type in your L2TP password here and
retype it into the "Retype Password" box to confirm it.
3. Host Name
Provided by your ISP. Enter your host name here.
4. Server IP Address
The IP address of L2TP server. This IP address should be
provided by your ISP.
(1)
, you may manually enter the login
(5)
.
(9)
. After you apply the
35 35
(1)
(2)
(3)
(4)
(7)
(5)
(6)
(8)
(9)
1
2
3
4
5
6
7
8
9
10