Belkin F5D8231-4 - N1 Wireless Router User Manual page 36

Alternate Setup Method
Setting your Internet Service Provider (ISP) Connection Type to
Point-to-Point Tunneling Protocol (PPTP)
[European countries only]
Some ISPs require a connection using PPTP protocol, a type of
connection most common in European countries. This sets up a direct
connection to the ISP's system. Type in the information provided
by your ISP in the space provided. When you have finished, click
"Apply Changes"
indicator will read "connection OK" if your Router is set up properly.
1. PPTP Account
Provided by your ISP. Enter your PPTP account name here.
2. PPTP Password
Type in your password and retype it into the "Retype Password"
box to confirm it.
3. Host Name
Provided by your ISP. Enter your host name here.
4. Service IP Address
Provided by your ISP. Enter your service IP address here.
5. My IP Address
Provided by your ISP. Enter the IP address here.
(9)
. After you apply the changes, the Internet Status
32 32
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)