Belkin F5D8231-4 - N1 Wireless Router User Manual page 59

Using the Web-Based Advanced User Interface
Setting up an Allow Access List
1.
Select the "Allow" radio button
computers allowed to connect to the wireless network.
2.
Next, in the "MAC Address" field that is blank
MAC address of the wireless computer to which you want to give
access to the wireless network.
3.
Continue to do this until all of the computers you want to add
have been entered.
4.
Click "Apply Changes"
Setting up a Deny Access List
The "Deny Access" list lets you specify computers that you DO NOT
want to access the network. Any computer in the list will not be
allowed access to the wireless network. All others will.
1.
Select the "Deny" radio button
computers to be denied access to the wireless network.
2.
Next, in the "MAC Address" field that is blank
MAC address of the wireless computer to which you want to deny
access to the wireless network.
3.
Continue to do this until all of the computers you want to deny
access to have been entered.
4.
Click "Apply Changes"
(1)
(2)
(4)
to finish.
(4)
to finish.
(3)
(1)
to begin setting up a list of
(3)
(2
) to begin setting up a list of
(3)
(4)
55 55
, type in the
, type in the
1
2
3
4
5
6
7
8
9
10