Belkin F5D8231-4 - N1 Wireless Router User Manual page 17

Knowing your Router
J. Reset Button
The "Reset" button is used in rare cases when the Router may
function improperly. Resetting the Router will restore the Router's
normal operation while maintaining the programmed settings. You
can also restore the factory default settings by using the "Reset"
button. Use the restore option in instances where you may have
forgotten your custom password.
i. Resetting the Router
Push and release the "Reset" button. The lights on the
Router will momentarily flash. The "Power/Ready" light will
begin to blink. When the "Power/Ready" light becomes solid
again, the reset is complete.
ii. Restoring the Factory Defaults
Press and hold the "Reset" button for at least 10 seconds,
then release it. The lights on the Router will momentarily
flash. The "Power/Ready" light will begin to blink. When
the "Power/Ready" light becomes solid again, the restore
is complete.
K. Power Jack – Black
Connect the included 12V/1A DC power supply to this jack.
L. Push Button
This button is set aside for the Wi-Fi Protected Setup
Refer to the "Changing the Wireless Security Settings" section for
more details.
13 13
10
feature.
™
1
2
3
4
5
6
7
8
9