Belkin F5D8231-4 - N1 Wireless Router User Manual page 19

Connecting and Configuring your Router
Step 1 Hardware Connections – Follow the Quick Installation
Guide (QIG)
������
�����
A.
Unplug your modem's power
cord. Put the Router next
��������
to the modem. Raise the
Router's antennas.
B.
Locate the networking cable
that connects your modem and
computer. Unplug that cable
from your modem, and plug it
into any gray port on the back of
the Router.
C.
Find your new networking cable
(included in the box with your
Router) and connect it to the
yellow port on the back of the
Router. Connect the other end to
your modem, in the port that's
now free.
D.
Plug in your modem's power cord.
Wait 60 seconds for the modem to
start up. Plug the Router's power
supply into the black port on the
back. Plug the other end into the
wall outlet.
E.
Wait 20 seconds for the Router to
start up. Look at the display on
the front of the Router. Make sure
the "Wired" and "Router" icons
are lit up in blue. If they are not,
recheck your connections.
15 15
1
2
3
4
5
6
7
8
9
10