Cisco AIR-AP1020 - 1000 Series Lightweight Access Point Quick Start Manual page 31

Installation and Configuration
Figure 14
5. Attach the cables to the sides of the Cisco Aironet 1000 Series lightweight access point.
Note • Be sure the cables are routed away from the Cisco Aironet 1000 Series lightweight access point
antennas.
• When the Cisco Aironet 1000 Series lightweight access point is powered up and is associated with
a Cisco Wireless LAN Controller (Green/Power and Yellow/802.11b/g and/or Yellow or
Amber/802.11a LEDs lit), the Cisco Aironet 1000 Series lightweight access point begins
broadcasting its beacon signal(s). When this happens, complete the installation as quickly as
possible to remove yourself from within 8 in. (20 cm) of the Cisco Aironet 1000 Series lightweight
access point to comply with FCC RF radiation exposure guidelines.
You have installed the Cisco Aironet 1000 Series lightweight access point. Repeat
Aironet 1000 Series Lightweight Access
point location, and then continue with
AP1020/1030 Cisco Aironet 1000 Series IEEE 802.11a/b/g Lightweight Access Points with External Antennas - Quick Start Guide
78-17147-01
Attaching the Cisco Aironet 1000 Series Lightweight Access Point to the Flush-Mount
Bracket
Points"
"Returning MAC
Mounting the Cisco Aironet 1000 Series Lightweight Access Points
for each Cisco Aironet 1000 Series lightweight access
Information."
"Mounting the Cisco
21