Cisco AIR-AP1020 - 1000 Series Lightweight Access Point Quick Start Manual page 27

Installation and Configuration
Figure 10
Attach the cables to the sides of the Cisco Aironet 1000 Series lightweight access point.
4.
Note • Be sure the cables are routed away from the Cisco Aironet 1000 Series lightweight access point
antennas.
• When the Cisco Aironet 1000 Series lightweight access point is powered up and is associated with a
Cisco Wireless LAN Controller (Green/Power and Yellow/802.11b/g and/or Yellow or Amber/802.11a
LEDs lit), the Cisco Aironet 1000 Series lightweight access point is broadcasting its beacon signal(s).
When this happens, complete the installation as quickly as possible to remove yourself from within
8 in.(20 cm) of the Cisco Aironet 1000 Series lightweight access point to comply with FCC RF radiation
exposure guidelines.
You have installed the Cisco Aironet 1000 Series lightweight access point. Repeat
Aironet 1000 Series Lightweight Access
point location, and then continue with
AP1020/1030 Cisco Aironet 1000 Series IEEE 802.11a/b/g Lightweight Access Points with External Antennas - Quick Start Guide
78-17147-01
Clipping the Cisco Aironet 1000 Series Lightweight Access Point and Ceiling-Mount
Clips to a Hanging-Ceiling Rail
Points"
"Returning MAC
Mounting the Cisco Aironet 1000 Series Lightweight Access Points
for each Cisco Aironet 1000 Series lightweight access
Information."
"Mounting the Cisco
17