Hoover U5117 Owner's Manual page 5

1-11
Attaching upper handle
Slide upper handle onto assembly,
as shown, until the handle snaps
into position.
1-14
Push bag firmly onto tube.
Tuck top and bottom of bag into bag
compartment.
Step 2 Attach tool
caddy
The tool caddy is designed to be
used either on the cleaner for easy
access to the tools or if the tools are
not going to be used, it can be
removed and hung for storage.
If you do not want to attach the
caddy to the cleaner at this time,
proceed to Step 3 for proper tool
placement on the caddy.
1-12
Insert the two screws at the front of
the handle to secure it onto the
assembly.
Tighten the screws.
1-15
F
To replace bag door, insert the 2
tabs (F) on bottom of door into the 2
slots on bag compartment.
Make sure all edges of bag are
completely inside the bag com-
partment.
Close door.
1-17
Slide edge of tool caddy down into
the channel on the back of the
cleaner.
Lift caddy off the cleaner to remove
it for storage.
1-13
E
Attaching filter bag
Align opening in bag with dirt tube
(E) inside bag compartment.
1-16
A
Remove green or white switch lock
(A) in back of the cleaner.
Step 3 Position tools
on caddy
1-18
Insert hose connector into bottom of
caddy.
Drape the hose over top and plug it
into the opposite end until it snaps
into place
Continued
5