Related Manuals for Hoover U5117
Summary of Contents for Hoover U5117
- Page 1 HOOVER Upright ® Owner’s Manual with Removable ENGLISH pp.1-13 ESPAÑOL pág. 14-20 Tool Rack FRANÇAIS p. 21-27 Read this manual before operating the cleaner www.hoover.com...
-
Page 2: Table Of Contents
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a Hoover Factory Service Center or Authorized Hoover Warranty Service Dealer (Depot). -
Page 3: Assembling Cleaner
The assembled cleaner will look like this drawing. If you need assistance with any step of the assembly or operation: Visit us on-line at www.hoover.com to find the service outlet nearest you (click on the “Service” button) OR call 1-800-944-9200 for an automated referral of authorized service outlet locations (U.S. - Page 4 Step 1 Assemble handle Note: The green or white switch lock (A) near the ON/OFF switch on the back of the bag compartment Attaching cord Removing bag door assembly, helps in assembling your cleaner. Slide cord protector (AA) away Pull bag door latch forward and from rectangular end of cord.
- Page 5 1-13 1-12 1-11 Attaching upper handle Attaching filter bag Insert the two screws at the front of the handle to secure it onto the Slide upper handle onto assembly, Align opening in bag with dirt tube assembly. as shown, until the handle snaps (E) inside bag compartment.
-
Page 6: How To Use
Avoid tipping cleaner or setting it on furniture, fringed area rugs, or carpeted stairs during tool use. Your HOOVER cleaner is Position extension wand (G) and now assembled and place crevice wand (H) inside ready to use! extension wand. -
Page 7: Handle Positions
Handle positions Transporting cleaner ON-OFF switch To move your cleaner from room to The handle of your cleaner has three To turn cleaner ON, depress switch (A) room, put handle in upright position, tilt positions; upright for storage and when t o w a rd front. -
Page 8: Cleaning Tools
2-10 Cleaning tools Tools allow you to clean surfaces above the floor and reach hard to clean areas. If the tool caddy has been removed, reposition it on the cleaner. Use tools with the cleaner handle in upright position. CAUTION: Agitator continues to rotate while cleaner handle is in upright Stair cleaning position. -
Page 9: Filter Bag
Filter bags may be purchased from your local Authorized Hoover Dealer (Depot), Familiarize yourself with these home maintenance tasks as proper use and Leading Retailers, from Hoover Factor y care of your cleaner will ensure contin- Service Centers, using the order form ued cleaning effectiveness. -
Page 10: Belt Replacement
This cleaner uses a 12 volt, wedge base Pull old bulb straight out of socket. type 912 bulb, Hoover part No. 27313- Push new bulb straight into socket until Let filter air dry and reposition it on 101. - Page 11 • calling 1-800-944-9200 for an automated re f e rral of authorized service outlet locations (U.S. only). Do not send your cleaner to The Hoover Company in North Canton for service, this will only result in delay. If further assistance is needed, contact...
-
Page 12: If You Have A Problem
Possible solution This warranty does not cover pick up, delivery, or house calls; however, if you • Hose clogged mail your appliance to a Hoover Factory • Clear blockage (see “Clearing Service Center for warranty service, blockages” section) transportation will be paid one way.