Rear-Panel Description; Power Connector - Cisco WS-C2940-8TT-S Hardware Installation Manual

Chapter 1 Overview

Rear-Panel Description

The rear panel of the switches, as shown in
console port.
Figure 1-4
1
2

Power Connector

You provide power to a switch by using the AC internal power supply. The internal AC power supply is
an autoranging unit that supports input voltages between 100 and 240 VAC. Use the supplied AC power
cord to connect the AC power connector to an AC power outlet.
The switch accessory kit includes an L-shaped AC power cord.
power cords that you can order from your Cisco sales representative.
Table 1-7
Type
110 V
Argentina
Australia, 10 A
China
Europe
Italy
Japan
Switzerland
UK
OL-6157-01
Catalyst 2940 Switch Rear Panel
1
AC power connector
RJ-45 console port
Spare L-Shaped Power Cords
Cisco Part Number
CAB-AC-RA=
CAB-ACR-RA=
CAB-ACA-RA=
CAB-ACC-RA=
CAB-ACE-RA=
CAB-ACI-RA=
CAB-JPN-RA=
CAB-ACS-RA=
CAB-ACU-RA=
Figure 1-4, have an AC power connector and an RJ-45
2
Table 1-7
Catalyst 2940 Switch Hardware Installation Guide
Rear-Panel Description
lists the spare L-shaped AC
1-9