Rear-Panel Description - Cisco WS-C2950-24 Hardware Installation Manual

Rear-Panel Description

Rear-Panel Description
Catalyst 2950 Desktop Switch Hardware Installation Guide
1-20
Figure 1-17 Bandwidth Utilization on Catalyst 2950G-24-EI and 2950G-24-EI-DC
Switches
1 2 3 4 5 6 7 8 9 10
1X
SYST RPS
STAT UTIL DUPLX SPEED
2X
Figure 1-18 Bandwidth Utilization on Catalyst 2950G-48-EI Switches
1 2 3 24 5 6 7 8 9 10 11 12 13 14
1X
SYST
RPS
STAT
UTIL
DUPLX
SPEED
2X
MODE
Other than the Catalyst 2950G-24-EI-DC switch, the rear panel of a Catalyst 2950
switch has an AC power connector, an RPS connector, and an RJ-45 console port.
(See Figure 1-19 and Figure
The rear panel of the Catalyst 2950G-24-EI-DC switch has a DC power connector
(also referred to as the terminal block header), a DC ground lug, an RPS
connector, and an RJ-45 console port. (See
11 12 13 14 15 16 17 18 19 20 21 22
11X 13X
12X 14X
< 25% +
25% – 49% +
50% +
15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 31 31 32
15X 17X 31X
16X 18X 32X
< 25% +
25% – 49% +
50% +
1-20.)
Figure
Chapter 1
Catalyst 2950
23 24
15X
16X
Catalyst 2950
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
33X 47X
34X 48X
1-21.)
Overview
78-11157-02