Rear-Panel Description - Cisco LRE CPE Hardware Installation Manual

Rear-Panel Description

Rear-Panel Description
Cisco LRE CPE Hardware Installation Guide
1-8
The LRE CPE rear panels have a power connector, two RJ-11 connectors, and,
depending on the model, either one or four RJ-45 Ethernet connectors.
Figure 1-6 and Figure 1-7
Table 1-5 list the rear-panel connectors and their descriptions.
Figure 1-6 Rear Panel of the Cisco 575 LRE CPE and Cisco 576 LRE 997 CPE
P W R
E N E T
W A L L P
Table 1-4 Cisco 575 LRE CPE and Cisco 576 LRE 997 CPE Rear-Panel
Connectors
Connector Label Connector Description
PWR
Power connector
ENET RJ-45 connector for the Ethernet port
WALL
RJ-11 connector for the telephone wall jack
PHONE RJ-11 connector for a telephone
show the rear panels of the CPEs.
H O N E
Chapter 1 Overview
Table 1-4 and
78-11469-04