Music Playback Via Bluetooth; Multimedia - Skoda OCTAVIA - 05-2010 Owner's Manual

– On the device to be connected, enter the password and follow any instructions
given on this device or in the information display.
– Enter the desired internet address in the internet browser. The operating system
requests the entry of the telephone number for the internet access (depending on
the operator, usually "*99#").

Music playback via Bluetooth

The universal telephone preinstallation GSM IIl makes it possible to play back music via
®
Bluetooth from the devices such as MP3 player, mobile phone or notebook.
In order to enable the music playback via Bluetooth
device, which should be connected, with the hands-free system in the menu Phone -
Bluetooth - Media player.
The music playback process is performed on the connected device.
Note
The device to be connected must support the Bluetooth
manual of the device to be connected.

Multimedia

Inputs AUX-IN* and MDI*
The input AUX-IN is located below the armrest* of the front seats and is marked with

.
The input MDI is located in the storage compartment on the front passenger side.
The inputs AUX-IN and MDI connect the external audio sources (e.g. iPod or MP3
player) and play back music from these devices via your radio* or navigation system*
installed in the factory.
The description of the operation can be found in the relevant Owner's Manual of your
radio* or your navigation*.
Using the system Safety
®
®
, it is necessary to connect the
®
profile A2DP, see Owner's
Driving Tips
Note

The loudspeakers in the vehicle are matched to a power output of the radio and
navigation system of 4x 20°W.

For the equipment sound system*, the loudspeakers are matched to a power
output of the amplifier of 4x40°W + 6x20 W.
CD changer*
The CD changer for the radio and navigation system is located in the left side compart-
ment of the luggage compartment.
Loading a CD
A
– Touch the button and guide the CD (compact disc) into the CD-case
C
CD is automatically loaded onto the next free position in the CD-changer. The LED
A
in the corresponding button
D
Load CDs
A
– Hold the button pressed for longer than 2 seconds and guide the CDs one after
C
the other (maximum 6 CDs) into the CD case
no longer flashing.
Loading a CD to one definite position
A
– Briefly touch the button . The LEDs in the buttons
C
spaces, which are already assigned and flash in the case of free memory spaces.
General Maintenance Breakdown assistance
Communication
Fig. 126 The CD changer
stops flashing.
A
. The LEDs in the buttons
B
A
light up at the memory
D
Technical Data
139
A
. The
B
A
are
D