Skoda OCTAVIA - 05-2010 Owner's Manual page 132


It is recommended to speak louder at higher speeds, so that the tone of your voice
is louder than the increased surrounding noise.

During the dialogue avoid additional noise in the vehicle, e.g. simultaneously
talking occupants.

Do not speak, if the system makes an announcement.

The microphone for voice control is inserted in the moulded headliner and
directed to the driver and front passenger. Therefore the driver and the front passenger
can operate the equipment.
Note
On vehicles which are factory-fitted with a navigation system Columbus, it is only
possible to operate the voice control via the navigation system. The description on
how to operate the voice control can be found in the operating instructions of your
navigation system.
Voice commands
The voice control is possible in the following languages:
Czech, English, German, French, Italian, Spanish, Russian, Portuguese, Dutch.
Basic voice commands for operating the telephone control unit
Voice command
After this command the system repeats all possible
HELP
commands.
With this command you call up the contact from the
CALL XYZ
phone book  page 131.
After this command, for example the phone book can
PHONE BOOK
be repeated, a voice entry for the contact can be
updated or deleted etc.
CALL REGISTER Lists of dialed numbers, missed calls etc.
After this command a phone number can be entered
DIAL NUMBER
which establishes a connection to the requested party.
Using the system Safety
After giving the command DIAL NUMBER, the system requests the entry of a tele-
phone number. The telephone number can be entered as an interconnected spoken
row of digits (complete number), in the form of order of digits (separation through a
brief voice pause) or through individually spoken digits. After each order of digits
(separation through brief voice pause) all of the digits detected up to now are repeated
by the system.
The digits 0 - 9, symbols +,
combinations such as twenty-three, but only individually spoken digits (two, three).
Call name
– Press the PTT button.
Action
– Give the command CALL XZY after the signal tone.
Example for calling the name from the phone book
Driving Tips General Maintenance
Voice command
After this command the system selects the last selected
REDIAL
number.
Play music from the mobile phone or another paired
MUSIC
device.
OTHER OPTIONS Sub-menu PHONE BOOK, CALL LISTS and SETTINGS.
SETTINGS
Selection for setting Bluetooth
CANCEL The dialogue is ended.
 , # are permitted. The system detects no continuous digit
Voice command
CALL XYZ
e.g. WORK
CALL XYZ WORK
Breakdown assistance
Communication
Action
®
, dialogue etc.
Announcement
"Say home, work, mobile"
"XYZ work is dialed."
"XYZ work is dialed."
Technical Data
131