Music Playback Via Bluetooth; Inputs Aux-In* And Mdi - Skoda FABIA - 03-2010 Owner's Manual

108 Communication
row of digits (complete number), in the form of order of digits (separation through a
brief voice pause) or through individually spoken digits. After each order of digits
(separation through brief voice pause) all of the digits detected up to now are repeated
by the system.
The digits 0 - 9, symbols +,  , # are permitted. The system detects no continuous digit
combinations such as twenty-three, but only individually spoken digits (two, three).
Call name
– Press the PTT button.
– Give the command CALL XZY after the signal tone.
Example for calling the name from the phone book
Voice command
CALL XYZ
e.g. WORK

Music playback via Bluetooth

The universal telephone preinstallation GSM II makes it possible to play back music via
®
Bluetooth from the devices such as MP3 player, mobile phone or notebook.
In order to enable the music playback via Bluetooth
device with the handsfree-system in the menu Phone - Bluetooth - Media player.
The operation of the music playback from the connected device can be performed via
the handsfree-system with the voice control  page 107 or directly via the connected
device.
Note
The device to be connected must support the Bluetooth
manual of the device to be connected.
Announcement
"Say home, work, mobile"
"XYZ work is dialed."
®
®
, it is necessary to connect the
®
profile A2DP, see Owner's

Inputs AUX-IN* and MDI*

The input AUX-IN is located below the armrest* of the front seats and is marked with

.
The input MDI is located in the front below the front passenger storage compartment.
The inputs AUX-IN and MDI connect the external audio sources (e.g. iPod or MP3
player) and play back music from these devices via your radio* or navigation system*
installed in the factory.
The description of the operation can be found in the relevant Owner's Manual of your
radio* or your navigation*.
Note

The loudspeakers in the vehicle are matched to a power output of the radio and
navigation system of 4x 20°W.

For the equipment sound system*, the loudspeakers are matched to a power
output of the amplifier of 4x40°W + 6x20 W.