Skoda OCTAVIA - 05-2010 Owner's Manual page 233

232 Fuses and light bulbs
Turn signal light at the front
Changing light bulb for turn signal light (at the front)
– Switch the ignition and all lights off.
– Remove the headlight  page 231.
– Turn the socket in the direction of arrow OPEN and take it out together with the
light bulb for the turn signal light
– Press the defective light bulb into the socket, turn to the left and remove.
– Press a new light bulb into the socket and turn the light bulb to the right as far as
the stop.
– Insert the socket with the changed light bulb into the headlight and secure it by
turning in the direction of arrow CLOSE to the right.
Note
After installing the headlight, the headlight setting must be checked by a specialist
garage.
Fig. 191 Removing the light bulb for the
turn signal light
 fig.
191.
Front parking lights and low beam
Removing the light bulb for the parking light
– Switch the ignition and all lights off.
– Remove the headlight  page 231.
A  page 231, fig.
– Remove the protective cap
B
A  fig.
– Remove the socket 192.
A
– Take the faulty bulb out of the fixture and insert a new one.
– Insert the protective cap.
Removing the light bulb for the low beam light
– Switch the ignition and all lights off.
– Remove the headlight  page 231.
A  page 231, fig.
– Remove the protective cap
B
– Turn the connector with the light bulb
 fig.
remove 192.
– Replace the lamp, insert the connector with the new lamp and turn to the right up
to the stop.
– Insert the protective cap.
Fig. 192 Removing the bulbs for the
parking and low beam light
189.
189.
A
up to the stop towards the left and
B