Step 7: Secure The Drive - Freecom LTO 460I Manual

Step 7: Secure the drive

Mounting hardware used
Secure the tape drive into place. Use the screws you removed in "Step 3: Prepare the
1
mounting bay" on page 11 to fix the drive in place, as shown in Figure 7a.
Replace the cover on the computer.
2
No mounting hardware used
Secure the tape drive into place. Check that the holes in the chassis are aligned with the holes
1
in the sides of the drive and use the screws provided to secure the drive, as shown in Figure
7b.
2
Replace the cover on the computer.
19 19