Yamaha RX-V667 Owner's Manual page 16

■
Using speakers in two rooms (Zone2
function)
■ 7.1-channel speaker layout + Zone2
(7 speakers (in main zone) + subwoofer (in main
zone) + front speakers (in secondary zone))
Main zone
Front speaker R
Subwoofer
Front speaker L
Center speaker
12 in (30 cm) or
Surround speaker L
more
Surround back speaker L Surround back speaker R
Zone2
Front speaker L
J
1 : Sound cannot be output from both the surround back speakers and the speakers
in the second zone at the same time.
In addition to the main room, speakers in another room can also
be controlled.
When the built-in amplifier for the speakers in another room is
turned on, the speakers that output the sound are switched from
the surround back speakers to the speakers in another room
J1
automatically.
■ Connections of speakers
Connect the speakers to the following jacks according to the
speaker layout. Refer to "Front/Center/Surround/Surround back
Surround
speaker and Subwoofer connection" and "Multi-zone audio system
speaker R
using the internal amplifier of this unit" for details on connecting
speakers (☞p. 17, p.
Speaker jacks FRONT L/R, CENTER, SURROUND L/R,
SURROUND BACK L/R, SUBWOOFER
EXTRA SP jack Zone2 speakers
■ Assigning a speaker configuration
Use the "Power Amp Assign" function which can easily apply the
appropriate speaker settings to this unit according to the speaker
configuration (☞p. 84).
Power Amp Assign 7ch + 1ZONE
Front
speaker R
18).
CONNECTIONS
Connecting speakers
16
En