Using Usb Storage Devices - Yamaha Tyros2 Owner's Manual

Using USB Storage Devices

1
Connect the USB storage device to the [USB TO DEVICE] terminal.
2
After connecting, exit once from the selection display, then return
to the display (or press the [TAB] buttons simultaneously from the
selection display).
This operation refreshes the display to indicated USB storage access. The USB tabs
(USB 1, USB 2, etc.) are automatically called up, allowing you to save files and play
back music data from the devices.
Checking remaining memory on the USB storage device
You can check this in the display called up by the following operation:
[FUNCTION] → [I] UTILITY → [TAB] MEDIA
Select the device by using the [A]/[B] buttons in this display and press the [PROPERTY]
LCD button ([F] button).
■ Protecting your data (write-protect)
To prevent important data from being inadvertently erased, apply the write-protect pro-
vided with each storage device or media. If you are saving data to the USB storage
device, make sure to disable write-protect.
■ Formatting USB storage media
When a message appears prompting you to format the device/media, execute the Format
operation (page 194).
Connecting to a USB Storage Device
NOTE
• The tabs indicating the connected
USB devices (USB 1, USB 2, etc.)
may be displayed up to USB 17 for
each device or partition. The num-
bers are not fixed and may change
according to the order in which the
devices are connected and dis-
connected.
CAUTION
• The format operation overwrites
any previously existing data.
Proceed with caution.
Tyros2 Owner's Manual
Quick Guide
65