System Setup; Using Control Panel Menus; Menu Overview - Xerox Phaser 3600 User Manual

2

System setup

This chapter provides step by step information on setting up your printer.
This chapter includes:
•

Using control panel menus

•

Menu overview

• Printing a demo page
• Changing the display language
Using control panel menus
A number of menus are available to make it easy for you to change the
printer settings. The diagram on the next column shows the menus and
all of the menu items available in each menu. The items in each menu
and the options you can select are described in more detail in the tables
beginning on page 2.2.
Accessing control panel menus
You can control your printer from the printer's control panel. You can
also set the control panel menus while the printer is in use.
1 Press Menu until the menu you want appears on the bottom line of
the display and press OK.
2 Press the Up/down arrow buttons until the desired menu item
appears and press OK.
3 If the menu item has sub menus, repeat step 2.
4 Press the Up/down arrow buttons to access the desired setting
option or the required value.
5 Press OK to save your selection.
An asterisk (*) appears next to the selection on the display,
indicating that it is now the default.
6 Press Start/Stop to return to Standby mode.
After 30 seconds of inactivity (no key being pressed), the printer
automatically returns to Standby mode.
Note
Print settings made from the printer driver on a connected
computer override the settings on the control panel.
Note
Some menus may not appear in the display depending on
options or models. If so, it is not applicable to your machine.
The control panel menus are used to configure the printer. The control
panel provides access to the following menus:
Information
(See page 2.2.)
Menu Map
Configuraton
Demo Page
PCL Font List
PS3 Font List
FlashDirectory
EPSON Font
Paper
(See page 2.4.)
Copies
Tray 1MPT Size
Tray 1MPT Type
Tray 2 Type
c
Tray 3 Type
Paper Source
Bypass MP Tray
Tray Chaining
Graphic
(See page 2.5.)
Resolution
Darkness
a
Network
(See page 2.8.)
TCP/IP
EtherTalk
NetWare
Ethernet Speed
Clear Setting
Network Info.
802.1x
Port 9100
LPR
IPP
SLP
CentreWare IS
SNMP
a. Available when the installed memory is larger than 128 MB.
b. Available when duplex unit is installed.
c. Available when optional tray 3 is installed.
2.1
<System setup>
Menu overview
a
Secure Print
(See page 2.2.)
a
Release
a
Delete
a
Layout
(See page 2.2.)
Orientation
Simplex Margin
b
Duplex
b
Duplex Margin
Image Adjust
System Setup
(See page 2.5.)
Language
Power Save
Auto Continue
Altitude Adj.
Auto CR
a
Collation
SmartDuplexing
Job Timeout
Job Held Timer
Maintenance
Parallel Setup
USB Setup
Panel Lockout
Secure Print
Low Toner
Cm or inches
Clear Setting
Emulation
(See page 2.7.)
Emulation Type
Setup
Hex Mode
b
a