Xerox Phaser 3600 User Manual page 56

Message Meaning
Open Heat Error There is a problem in
Cycle Power the fuser unit.
Out-Bin Full The output tray of the
machine is full of
paper.
Overheat Error There is a problem in
Cycle Power the fuser unit.
Paper Jam 0 Paper has jammed in
Open/Close the feeding area of
Door tray.
Paper Jam 1 Paper has jammed in
Open/Close the fuser area.
Door
Paper Jam 2 Paper has jammed in
Check Inside the paper exit area.
Printing... The printer is printing
jobs using the
displayed language.
Ready The printer is on-line
and ready to printer.
Remove Jam Paper has jammed in
Open/Close the fuser area.
Door
Self Diagnostics The engine in your
Temperature printer is checking
some problems
detected.
Self Diagnostics The engine in your
LSU printer is checking
some problems
detected.
Sleeping... The printer is in
power save mode.
SMPS Fan There is a problem
Locked with the SMPS
(Switch Mode Power
Supply) Fan.
Suggested solutions
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
Remove paper.
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
Clear the jam. See
page 9.1 and
page 9.1.
Clear the jam. See
page 9.3.
Clear the jam. See
page 9.4.
Complete your
printing.
Use your printer.
Clear the jam.
(Page 9.3)
Please wait a few
minutes.
Please wait a few
minutes.
When data is
received, it switches
to on-line
automatically.
Unplug the power
cord and plug it back
in. If the problem still
persists, please call
for service.
9.9
Message Meaning
Tray 1 Paper has jammed in
Paper Jam 0 tray 1(MPT).
Tray 2 Paper has jammed in
Paper Jam 0 Tray 2.
Tray 3 Paper has jammed in
Paper Jam 0 optional tray n.
<Troubleshooting>
Suggested solutions
Clear the jam.
(Page 9.2)
Clear the jam.
(Page 9.1)
Clear the jam.
(Page 9.2)