System Setup Menu - Xerox Phaser 6500 User Manual

System Setup Menu

Use this menu to configure the general operation settings of the printer. For example, time to energy
saver mode, alarm settings, and so on.
Item
Power Saver Time
Audio Tones
Fault Time-Out
Time-Out
Language
Downloaded From ManualsPrinter.com Manuals
Description
Specifies the length of time, 5–60 minutes, that the printer is idle before
going into Energy Saver mode. For details on setting the Power Saver Time,
see Setting the Power Saver Time
Specifies whether an alarm sounds when one of the following printer errors
or actions occurs. The alarms are set to Off by default. The volume cannot
be adjusted.
• Control Panel
• Invalid Key
• Machine Ready
• Job Complete
• Fault Tone
• Alert Tone
• Out of Paper
• Low Toner Alert
• Base Tone
Specifies the amount of time before the printer automatically deletes a
print job when there has been a job error.
Set the default timeout, up to 60 seconds, in one-second increments.
Automatically cancels a print job when it goes beyond a specified time. Set
the duration allowed for the print time. When the time expires, the print job
is canceled. Duration can be set for up to 30 minutes in one-minute
increments.
Specifies the language used in the control panel menus and in printed
Information Pages.
Control Panel Menus
on page 23.
Phaser 6500 Color Laser Printer
User Guide
95