Vivotek FD8361 User Manual page 64

VIVOTEK
Click Viewing Window to open the viewing region settings page� On this page, you can set the Region
of Interest and the Output Frame Size for stream 1 ~ 3�
Please follow the steps below to set up those settings for a stream:
1� Select a stream which you want to set up the viewing region� If you want to stream out the video to a
mobile device, please select stream 3�
2� Select a Region of Interest from the drop-down list. The floating frame, the same as the one in the
Gloabl View window on the home page, will resize accordingly� If you want to set up a customized
viewing region, you can also resize and drag the floating frame to a desired position with your mouse.
3� Choose a proper Output Frame Size from the drop-down list according to the size of your monitoring
device�
■ The parameters of the multiple streams:
Stream 1 1600 X 1200 ~ 176 x 144 (Selectable)
Stream 2 1600 X 1200 ~ 176 x 144 (Selectable)
Stream 3 1468 x 1200 ~ 176 x 144 (Selectable)
Stream 4
■ The maximum Region of Interest of stream 3 is 1468 x 1200� You can also check the item "Set region
to full view" to extend the region to full view (1600 x 1200)� However, the image will be distorted a little
bit�
When completed with the settings in the Viewing Window, click Save to enable the settings and click
Close to exit the window� The selected Output Frame Size will immediately be applied to the Frame
size of each video stream as shown on page 66� Then you can go back to the home page to test the
e-PTZ function� For more information about the e-PTZ function, please refer to page 74�
64 - User's Manual
Region of Interest
1600 X 1200 (Fixed)
Output frame size
1600 X 1200 ~ 176 x 144 (Selectable)
1600 X 1200 ~ 176 x 144 (Selectable)
176 x 144 (Fixed)
1600 X 1200 (Fixed)