Vivotek FD8361 User Manual page 132

VIVOTEK
Group: camctrl
NAME VALUE
enablehttptunnel <boolean>
Group: camctrl_c<0~(n-1)> for n channel product
NAME VALUE
panspeed -5 ~ 5
tiltspeed -5 ~ 5
zoomspeed -5 ~ 5
autospeed -5 ~ 5
focusspeed -5 ~ 5
patrolseq string[64]
patroldwelling string[128]
preset_i<0~(npre string[40]
set-1)>_name
preset_i<0~(npre 0~999
set-1)>_dwelling
uart 0 ~ (m-1), m
is UART count
cameraid 0~255
isptz 0 ~ 2
disablemdonptz <boolean>
Group: snmp (capability.snmp) (product dependent)
NAME
v2
v3
secnamerw
132 - User's Manual
SECURITY
(get/set)
1/4
SECURITY
(get/set)
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
VALUE SECURITY
(get/set)
0~1 6/6
0~1 6/6
string[31] 6/6
5: LOG_NOTICE
6: LOG_INFO
7: LOG_DEBUG
DESCRIPTION
Enable HTTP tunnel for camera control.
(capability.ptzenabled)
DESCRIPTION
Pan speed
Tilt speed
Zoom speed
Auto pan speed
Auto focus speed
(For external device)
The indexes of patrol points, separated by ","
(For external device)
The dwelling time of each patrol point, separated by ","
Name of the preset location.
The dwelling time of each preset location.
Select corresponding uart
(capability.nuart>0).
Camera ID controlling external PTZ camera.
0: disable PTZ commands.
1: enable PTZ commands with PTZ driver.
2: enable PTZ commands with UART tunnel.
Disable motion detection on PTZ operation.
DESCRIPTION
SNMP v2 enabled. 0 for disable, 1 for enable
SNMP v3 enabled. 0 for disable, 1 for enable
Read/write security name