Audio And Video - Vivotek FD8361 User Manual

VIVOTEK

Audio and Video

This section explains how to configure the audio and video settings of the Network Camera. It is
composed of the following two columns: Video Settings and Audio Settings�
Video Settings
Video title: Enter a name that will be displayed on the title bar of the live video�
Video Title
2009/11/30 13:44:17
Title and Time
Video 13:44:17 2009/11/30
Color: Select to display color or black/white video streams.
Power line frequency: Set the power line frequency consistent with local utility settings to eliminate image
flickering associated with fluorescent lights� Note that after the power line frequency is changed, you
must disconnect and reconnect the power cord of the Network Camera in order for the new setting to
take effect�
Iris mode: Select a proper iris mode for your environment�
Select caching stream: This Network Camera supports time shift cache stream on the Network Camera�
Select one stream and check the below option Enable time shift caching stream�
Enable time shift caching stream Advanced Mode : Check this item to enable the time shift cache
stream on the Network Camera, which will stores video in the camera's embedded memory for a period
of time depending on the cache memory of each Network Camera� This function can work seamlessly
with VIVOTEK's recording software� When an event occurs, the recording software can request time shift
cache stream from the camera, which allows the user to get an earlier video data�
Video orientation: Flip--vertically reflect the display of the live video; Mirror--horizontally reflect the display
of the live video� Select both options if the Network Camera is installed upside-down (ex� on the ceiling)
to correct the image orientation. Please note that the preset locations will be cleared after flip/mirror.
User's Manual - 57