Ready To Use; Adjusting The Lens - Vivotek FD8361 User Manual

VIVOTEK

Ready to Use

1� Access the Network Camera on the LAN�
2� Retrieve live video through a web browser or recording software�

Adjusting the Lens

Based on the live image retrieved from the camera, adjust the camera lens by doing the
following:
To adjust the viewing angle -- 3-axis mechanism design
1� Loosen the pan adjustment screw and then turn the lens module left and right� Upon
completion, tighten the screw�
2� Loosen the tilt adjustment screws on both side of the camera and then turn the lens module
up and down� Upon completion, tighten the screws�
3� Loosen the rotation adjustment screw and then turn the lens to adjust the image orientation�
Upon completion, tighten screw�
Rotate the screw
Turn the lens
Loosen
Pan 350°
14 - User's Manual
1
Tighten
Loosen
Tilt 95°
T h e s o p h i s t i c a t e d 3 - a x i s m e c h a n i s m
design offers very flexible, easy hardware
installation for either ceiling or wall mount�
2
Tighten
Tighten
Loosen
3
Rotate 350°