Vivotek FD8361 User Manual page 152

VIVOTEK
IP Filtering
Note: This request requires Administrator access privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/ipfilter.cgi?type[=<value>]
http://<servername>/cgi-bin/admin/ipfilter.cgi?method=add<v4/v6>&ip=<ipaddress>[&index
=<value>][&return=<return page>]
http://<servername>/cgi-bin/admin/ipfilter.cgi?method=del<v4/v6>&index=<value>[&return
=<return page>]
PARAMETER VALUE
type NULL
allow, deny Set IP filter type
method addv4
addv6
delv4
delv6
ip <ip
address>
index <value>
return <return
page>
s<0~(m-1)>_h26
4_profile
Get SDP of Streams
Note: This request requires Viewer access privileges.
Method: GET/POST
152 - User's Manual
DESCRIPTION
Get IP filter type
Add IPv4 address into access list.
Add IPv6 address into access list.
Delete IPv4 address from access list.
Delete IPv6 address from access list.
Single address: <ip address>
Network address: <ip address / network mask>
Range address:<start ip address - end ip address>
The start position to add or to delete.
Redirect to the page <return page> after the parameter is assigned. The
<return page> can be a full URL path or relative path according to the
current path. If you omit this parameter, it will redirect to an empty
page.
0~2 4/4 0 => Baseline profile
1 => Main profile
2 => High profile