Configuring The Onetouch Buttons - Visioneer OneTouch 9750 User Manual

Right-click on a button, for example the Scan
button, and the OneTouch Properties window
opens for that button. The tab at the top of the
OneTouch Properties window shows which
button's settings are being displayed.
C
ONFIGURING THE
When you first connect your scanner to a computer, the scanner's
software configures each button with appropriate settings. Each
OneTouch button configuration consists of a Destination Application,
a Scan Configuration, and a Document Format. The OneTouch
Properties window is where you select these three elements for a button.
To open the OneTouch Properties window:
1. Click the OneTouch icon. It is located in the Windows
Notification Area at the bottom right corner of the screen.
2. Right-click a button on the OneTouch Button Panel.
Remember: left-clicking a button on the OneTouch Button Panel starts
the scan process. Right-clicking opens the OneTouch Properties window.
The OneTouch Properties window opens for that button.
This example shows the settings for the Scan button. The tabs
across the top of the window correspond to the buttons. Clicking a
tab shows the current settings for the corresponding button on the
scanner and OneTouch Button Panel.
C
ONFIGURING THE
O T B
NE OUCH UTTONS
O T B
NE OUCH UTTONS
37