Installing; Before You Begin - Visioneer OneTouch 9750 User Manual

Installing

Installation is a quick, four-step process:
1. Assemble the scanner
2. Install the software
3. Connect the power supply
4. Connect the USB cable and turn on the power
B Y B
EFORE OU EGIN
Please make sure of the following before you begin installation:
If your computer has AntiVirus or AntiSpyware software running,
■
you may see messages during installation asking you to allow the
installation to proceed. Although the messages will differ based on
the software your computer is running, in each case you should
allow the installation to proceed. Alternatively, you can turn off the
AntiVirus or AntiSpyware software before installing your scanner,
but if you do, make sure to turn it back on again when installation
is finished.
If you already have a scanner connected to your computer, it is
■
recommended that you remove that scanner's driver program prior
to installing your Visioneer 9750 scanner. While in some cases you
can configure your computer to have another manufacturer's
scanner operational on your computer in conjunction with the
Visioneer 9750 scanner, we do not recommend this configuration
as you may lose some of the driver functionality on one, or both of
the units. You can remove these programs from the Windows Add/
Remove programs list. Please refer to the user manual provided
with your other scanner hardware for instructions about removing
the driver and software for that unit.
B Y B
EFORE OU EGIN
5