Visioneer OneTouch 9750 User Manual page 119

112 V 9750 S
ISIONEER
The Scan Info box shows the
size and position of the area.
U ' G
CANNER SER S UIDE
The selected scan area.
Note that the selected area in the example has the number "1" in its
upper left corner indicating it is your first selected area.When using
the Flatbed you can select up to six separate areas on an image.
You can now move or resize the outline to select the specific area
you want to scan.
2. To move the dotted outline, put the pointer in the selected area and
drag the mouse.
3. To resize the selected area, put the pointer on a dotted line and drag
it.
Note that as you drag a dotted line, the menu selection for the
image size changes to Custom to indicate you are customizing the
size.
The Scan Info box on the lower left portion of the Advanced
Interface shows the information for the new area. If you selected
multiple areas, tabs on the Scan Info box represent each area. Click
on an area's tab to see its Scan info.
This is the image that appears
on the PaperPort desktop
when scanning is finished.