Configuring Onetouch Autolaunch - Visioneer RoadWarrior 3 Series User Manual

® TM
V R W
ISIONEER OAD ARRIOR
2. Align a document with the aliment arrow and insert it into the scanner, face up, into the paper feed slot.
The scanner grabs the top edge of the paper and automatically begins to scan and feed the paper through
the scanner.
3. A scan progress window opens and the image is sent to the selected application for the PaperIn button.
4. You can now work with the image in the Destination Application.
C O
ONFIGURING NE
When you installed OneTouch, the software was automatically configured with appropriate settings consisting of:
a Destination Application, a Scan Configuration, and a File Format.
You can open the OneTouch Properties window by pressing and holding the scanner button for 3 seconds, or by
opening it from the OneTouch Panel on screen.
1. Click on the OneTouch icon.
2. Right click on the PaperIn button, or single left-click on the detailed information.
Right click on PaperIn, left lick on the
detailed information, or press and the
scanner button for 3 seconds to open the
OneTouch Properties.
Note: Some of the options on the One Touch Properties Window are "grayed out" and are not available, these
options are not appropriate for your scanner model.
26
S M S
ERIES OBILE CANNERS
T A L
OUCH UTO AUNCH
S U ' G
CANNER SER S UIDE