Mac Config; Ieee1394 Controller; Hd Audio; Ide Hdd Block Mode - EVGA 680i - nForce LT SLI Motherboard User Manual

MAC Config

Press to display the MAC Config menu.
Enter
MAC0 LAN
MAC1 LAN
MACx LAN
Use these functions to set the MAC0 and/or MAC1 LANs to
disable their functions.

IEEE1394 controller

This function on the Integrated Peripherals menu allows you to enable or
disable the IEEE1394 (Firewire) interface.

HD Audio

This function on the Integrated Peripherals menu allows you to enable or
disable the audio function.

IDE HDD Block Mode

Using this function on the Integrated Peripherals menu allows your IDE hard
drive needs to support block mode. Select
the optimal number of block read/writes per sector the drive can support.
Select
[Disabled]

Onboard FDC Controller

This function on the Integrated Peripherals menu allows you to enable or
disable the onboard FDC controller function.

Onboard Serial Port 1

This function on the Integrated Peripherals menu allows you to select the
onboard serial port 1 function. Options are
,
[3E8/IRQ4]
56
[Enabled]
[Disabled]
if your drive does not support block mode.
, and
[Auto] [Disabled].
to automatically detect
[Enabled]
,
[3F8/IRQ4] [2E8/IRQ3]
or
Auto
,