Ide Function Setup - EVGA 680i - nForce LT SLI Motherboard User Manual

IDE Function Setup

Press to display the IDE Function Setup menu.
Enter
OnChip IDE Channel0
Primary Master
Primary Slave
Primary Master
Primary Slave
IDE DMA transfer access
Serial-ATA Controller
IDE Prefetch Mode
OnChip IDE Channel0
Use this function to enable
or disable the onchip IDE
Channel0. When disabled,
the Primary Master/Slave
functions are changed to
and cannot be
Auto
changed.
Primary Master/Slave PIO
When
OnChip IDE Channel0
mode for the primary Master and Slave PIO. Select from
through
Mode 4
Primary Master/Slave UDMA
When
OnChip IDE Channel0
primary Master and Slave UDMA or set it to
IDE DMA transfer access
Use this function to enable or disable IDE DMA transfer access.
Serial-ATA Controller
This function allows you to enable specific SATA controllers, enable all
controllers, or disable all controllers. The options available are
[SATA-0+1]
IDE Prefetch Mode
Use this function to enable or disable the
54
[Enabled]
PIO [Auto]
PIO [Auto]
UDMA [Auto]
UDMA [Auto]
[Enabled]
[All Enabled]
[Enabled]
OnChip IDE Channel0
Primary Master
x
Primary Slave
x
Primary Master
x
Primary Slave
x
IDE DMA transfer access
Serial-ATA Controller
IDE Prefetch Mode
is set to
.
is set to
, , and
[Enable All]
PIO
PIO
UDMA
UDMA
, you can select a
[Enabled]
Auto
, you can disable the
[Enabled]
.
[Auto]
.
[Disabled]
IDE Prefetch mode
[Disabled]
Auto
Auto
Auto
Auto
[Enabled]
[All Enabled]
[Enabled]
, or
Mode 1
,
[SATA-0]
.