Connecting Cables and
Setting Switches
This section takes you through all the connections and switch settings necessary
on the motherboard. This will include:
Power Connections
24-pin ATX power (
8-pin ATX 12V power (
Auxiliary power for graphics (
Internal Headers
Front panel
IEEE 1394a
USB Headers
Audio
COM
FDD
IDE
Serial ATA II
Chassis Fans
Rear panel USB 2.0 Adapter
Expansion slots
CMOS jumper settings
See Figure 1 on page 9 to locate the connectors and jumpers referenced in the
following procedure.
)
PWR1
)
PWR2
PWR3
)
Hardware Installation
15