Init Display First; Reset Configuration Data; Resources Controlled By - EVGA 680i - nForce LT SLI Motherboard User Manual

Init Display First

This function on the PnP/PCI Configuration menu allows you to define if the
initial display is in the PCI slot or in the PCI Express slot. Options are
[PCI Slot]

Reset Configuration Data

This function on the PnP/PCI Configuration menu allows you to enable or
disable the resetting of Extended System Configuration Data (ESCD) when you
exit Setup. Set this to
system reconfiguration has caused a serious conflict that prevents the OS from
booting. The default setting is

Resources Controlled By

This function on the PnP/PCI Configuration menu allows you to define if the
BIOS can automatically configure all the boot and plug-and-play compatible
devices or if you can manually select IRQ, DMA, and memory base address
fields. Select
[Auto(ESCD)]
these fields. If you select
is enabled for input.
Resources
Resources Controlled By
x IRQ Resources
Resources Controlled By
IRQ Resources
60
and
[PCIEx].
if you have installed a new add-on and the
[Enabled]
[Disabled]
if you want the BIOS to automatically populate
so you can assign the resources,
[Manual]
[Auto(ESCD)]
Press Enter
[Manual)]
[Press Enter]
.
IRQ