Use Maps With The Compass; Display Indicators; Move On A Map - Nokia 002L103 User Manual

Use Maps with the compass

Select Menu > Maps.
When the compass in your device is enabled, the
circle around the compass is green, and the map
view rotates automatically according to the
direction to which the top of the device is pointing.
To enable the compass, select
Turn compass on. When the compass is not in use,
the circle around the compass is white, and the map
view does not rotate automatically.

Display indicators

Select Menu > Maps.
The GPS indicator
of the satellite signals. One bar is one satellite.
When the device tries to find satellite signals, the
bar is yellow. When the device receives enough data
from the satellites for GPS to calculate your location,
the bar turns green. The more green bars, the more
reliable the location calculation.
Initially, your device must receive signals from at
least four satellites to calculate your location. After
the initial calculation, signals from three satellites
may be enough.
98
Options Tools
> >
shows the availability
The data transfer indicator
internet connection used, and the amount of data
transferred since the application started.

Move on a map

Select Menu > Maps.
When the GPS connection is active,
current location on the map.
View your current or last known location —
Select Options My position.
>
Move on the map — Drag the map. By default, the
map is oriented north.
When you have an active data connection and
browse the map on the display, a new map is
automatically downloaded, if you browse to an area
not covered by the maps that have already been
downloaded. The maps are automatically saved in
the device memory or on a compatible memory
card, if available in your device.
Zoom in and out on the map — Select + and -.
Change the map type — Select
mode.
shows the
shows your
Options Map
>